Henry 3/8" Flare Oil Strainer

Product code:
SH9105
Product Group : | Oil Driers & Strainers |
---|
General Information
Model Number : | SH9105 |
---|---|
Product Group : | Oil Driers & Strainers |
Type : | Oil separator |
Connections
Connection Type : | Flare |
---|---|
Inlet Connection Size : | 3/8 in |
Outlet Connection Size : | 3/8 in |
Logistical Information
Commodity Code : | 84189990 |
---|---|
Country Of Origin : | GBR |
Measurements
Height : | 66 mm |
---|---|
Length : | 153 mm |
Weight : | 0.37 kg |
Pressure
Max Operating Pressure : | 45 Bar |
---|---|
Max Water Pressure : | 45 Bar |
Working Pressure : | 45 Bar |
Standards
CE Cat : | SEP |
---|
Temperature
Operating Temperature Range : | -10-120 °C |
---|---|
Temperature Range : | -0-100 °C |
Henry Oil Line Strainer 3/8 MSAEThe Henry Technologies SH-9105 oil strainer can be used in both Low andHigh Pressure Oil Management Systems. The strainer is suitable for HCFCand HFC refrigerants, along with their associated oils.Although the strainer is compatible with HFC/POE refrigerant/oil combinations,Henry Technologies recommends the use of an oil filter or oil filter-drier. Thisis due to the scavenging nature of POE oil.Greater system protection will be achieved using an oil filter or oil filter driersover a traditional oil strainers.Typically, an oil strainer is fitted immediately upstream of a mechanical oillevel regulator in order to protect the float needle valve from debris. This inturn protects the compressor from damage.